The Source Files Could Not Be Found
2021年2月23日Download here: http://gg.gg/oep67
Many a time it is seen that users while trying to repair various software issue in the computer, they normally run various commands.Dism Error 0x800f081f Source File Not Found
The DISM error “The Source files could not be found” is a common error which you will receive because of the following reasons. If the DISM tool cannot able to find the required file in windows update or WSUS while repair then you will receive this error when using this command.
The commonly used command for repairing the Windows System Image is the DISM command.
*The source files could not be found. Use the ’Source’ option to specify the location of the files that are required to restore the feature.
*The source files could not be found. Use the ’Source’ option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see The DISM log file can be found at C: WINDOWS Logs DISM dism.log.
*Important: Follow the below steps, exactly as mentioned: 1. Right click at Start menu and select Command Prompt (Admin). Type the following command and press Enter: DISM /Online /Cleanup-Image /StartComponentCleanup 3. When the operation is completed, give the following command (and press Enter.
But many a time it is seen that while running the DISM command viz. Dism /Online /Cleanup-Image /RestoreHealth.
After pressing the enter button, people normally encounter an error in which code is 0x800f081f or the source files could not be found.
This error is one of the weirdest errors people encounter and I am here to let you know how you too can fix this issue by yourself.
So without further ado let’s begin.How To Fix DISM The Source Files Could Not Be Found Error?Method 1:- Download Window 10 ISO File
The first method which I would suggest to fix the issue is downloading the Windows 10 ISO File from the Microsoft official site.
It is quite easy and simple.
The only thing which you need to do is click on this link which will eventually open the Microsoft official site and accordingly you can download the download from there only.
I believe after running the DISM command, you wouldn’t be getting the issue anymore.Method 2:- Run Component Clean Up Command
You can also run the component clean up command to fix the DISM the source files could not be found error.
Let me tell you, it’s very easy.
The only thing you need to do is,
1. Go to your search box which is situated in the top right corner of your computer screen and type Command Prompt.
2. After opening the command prompt window, right-click on it and click run as administrator.
3. After opening the command prompt admin window, type dism.exe /online /Cleanup-Image /StartComponentCleanup.
4. After typing the component clean up command, press the enter button.
5. Restart your computer and try running the DISM command.
I hope you wouldn’t be getting the issue anymore.Method 3:- Contact Microsoft
If you are still not able to fix the 0x800f081f error, I think you need to contact the microwave support team.
If you contact the Microsoft team personally, I believe they will eventually find solutions to your problem.
To visit the Microsoft support team page, click on this link to open the page and click on Get Started.
You can contact the team via a virtual assistant and else you can contact via call on this number 18001021100.
Moreover, you can also contact this Microsoft support page where you will find various articles and forums especially focusing on this issue.Conclusion
So here’s comes to the end of this topic.
I believe after reading the entire article, you too can be able to fix the DISMthe source files could not be found error.
I strongly believe, out of the above three methods, one method will definitely help you to fix this issue.
Moreover, still, if you have any queries, I am very much ready to taking up questions.
I suggest you let me know in the comment section below.
SIMILAR POSTS WHICH YOU WILL LIKE,
Last updated on August 6th, 2019
Download amtlib.dll.7z How to install amtlib.dll: Copy file amtlib.dll to the installation directory of the program that is requesting amtlib.dll. If that doesn’t work, you will have to copy amtlib.dll to your. Double-click on the Adobe CC 2017 Patcher located insideit. Set the program in the Program label (be sure to choose x32 or x64correctly). Afterwards, it should begin to detect its copy automatically. The Source Files Could Not Be Found. Try Installing The Roles Role Services
This tutorial contains instructions to resolve the following problem in Server 2016: ’Windows Defender Feature Installation Failed. Source files could not be found’.
After removing the Windows Defender feature and the payload, on a Windows Server 2016, by using the ’Dism /online /Disable-Feature /FeatureName:Windows-Defender /Remove /NoRestart /quiet’ command, it’s impossible to install the Windows Defender feature again. The problem remains even if you define an offline image, as an alternate source path, either in ’Add Roles and Features’ wizard or in the DISM command: ’DISM /Online /Enable-Feature /FeatureName:Windows-Defender /Source:X:SourcesInstall.wim’.How to FIX: Windows Defender Feature Installation Failed – 0x800f081f on Server 2016
1. Place the Windows Server 2016 installation Media on the server. *
* Note: If you don’t own the Windows Server 2016 Installation media, then download the media in an ISO file and then mount the ISO. Keep in mind that you have to mount an image of the exact same version and build of the Windows Server 2016 that you want to repair.e.g. If you ’re running the 1607 version, you need the 1607 version in an ISO file.
2. Create the following two (2) folders on the root of C: drive:
1. mountdir
2. msu
3. Launch Command Prompt as Administrator and give the following command, to list all the Windows Server 2016 versions that included in the ’install.wim’ file.: *
*dism /Get-WimInfo /WimFile:X:sourcesinstall.wim
* Note: Where X = the drive letter of the Windows Server 2016 install media or the mounted ISO file. e.g. if the install media is on drive H: type:
*dism /Get-WimInfo /WimFile:H:sourcesinstall.wim
4. Find out the Index number of the installed Server 2016 edition.*
* e.g.: If you have installed the ’Windows Server 2016 Standard with the Desktop Experience’, then the index number is 2.
5. Then give the command below to extract the corresponding to your Windows Server 2016 version ’install.wim’ file (Index number): *
*dism /export-image /SourceImageFile:X:sourcesinstall.wim /SourceIndex:IndexNumber /DestinationImageFile:C:install.wim /Compress:max /CheckIntegrity
* Note: Replace at the above command the drive letter and the IndexNumber according to your case.
e.g. For this example we want to extract the install.wim file with Index number=2 (Windows Server 2016 Standard) to the root of the ’C:’ drive (C:install.wim). So, the command will be:
*dism /export-image /SourceImageFile:H:sourcesinstall.wim /SourceIndex:2 /DestinationImageFile:C:install.wim /Compress:max /CheckIntegrity
6. When the extraction is completed, proceed and remove the ’Read Only’ attribute from the extracted ’install.wim’ file, by giving this command:
*attrib.exe -r C:install.wim
7. Now, mount the extracted install.wim image to ’C:mountdir’ folder, with this DISM command:
*dism.exe /mount-wim /WimFile:C:install.wim /index:1 /mountDir:c:mountdir
8. give the following command to see the installed Server version.
*winver
9. According to the installed version, navigate to Microsoft Update Catalog and download the corresponding cumulative update for your Server 2016 version/build* and then place the update into the ’C:MSU’ folder.Dism Restorehealth Error 0x800f081f
* e.g. If you have the 1607 version, proceed and download the KB4103720 update.
10. When the download is complete, proceed and update the mounted offline Windows image (at ’C:mountdir’ folder) with the downloaded update (from ’C:MSU’ folder), by giving this command:
*Dism /Add-Package /Image:C:mountdir /PackagePath:C:MSUUpdate-Name.msu /LogPath:AddPackage.log
* Note: In the above command change the ’Update-Name’ with the name of the downloaded update. For example: if you have downloaded the KB4103720 update, the command will be:
*Dism /Add-Package /Image:C:mountdir /PackagePath:C:MSUwindows10.0-kb4103720-x64_c1fb7676d38fffae5c28b9216220c1f033ce26ac.msu /LogPath:AddPackage.logThe Source Files Could Not Be Found
11. When the operation is completed, open Task Manager and close the Explorer.exe task. (this is important otherwise you ’ll receive the error ’the directory could not be completely unmounted’ at the next step).
12. Give the following command to commit the changes back to the offline ’C:install.wim’ image and to unmount it. *Dism The Source Files Could Not Be Found
*Dism /Unmount-WIM /MountDir:C:mountdir /Commit
13. When the changes are committed back, open Task Manager again and from the File menu, choose Run New Task, type explorer.exe and hit OK.
14. Finally, give the following command to install the Windows Defender feature in Server 2016:
*Dism /Online /Enable-Feature /FeatureName:Windows-Defender /all /source:WIM:C:install.wim:1 /LimitAccess.net 3.5 The Source Files Could Not Be Found
15. Close all windows and restart your server to apply changes.
That’s all folks! Did it work for you?
Please leave a comment in the comment section below or even better: like and share this blog post in the social networks to help spread the word about this solution.If this article was useful for you, please consider supporting us by making a donation. Even $1 can a make a huge difference for us in our effort to continue to help others while keeping this site free:If you want to stay constantly protected from malware threats, existing and future ones, we recommend that you install Malwarebytes Anti-Malware PRO by clicking below (we do earn a commision from sales generated from this link, but at no additional cost to you. We have experience with this software and we recommend it because it is helpful and useful):Full household PC Protection - Protect up to 3 PCs with NEW Malwarebytes Anti-Malware Premium!
Download here: http://gg.gg/oep67
https://diarynote-jp.indered.space
Many a time it is seen that users while trying to repair various software issue in the computer, they normally run various commands.Dism Error 0x800f081f Source File Not Found
The DISM error “The Source files could not be found” is a common error which you will receive because of the following reasons. If the DISM tool cannot able to find the required file in windows update or WSUS while repair then you will receive this error when using this command.
The commonly used command for repairing the Windows System Image is the DISM command.
*The source files could not be found. Use the ’Source’ option to specify the location of the files that are required to restore the feature.
*The source files could not be found. Use the ’Source’ option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see The DISM log file can be found at C: WINDOWS Logs DISM dism.log.
*Important: Follow the below steps, exactly as mentioned: 1. Right click at Start menu and select Command Prompt (Admin). Type the following command and press Enter: DISM /Online /Cleanup-Image /StartComponentCleanup 3. When the operation is completed, give the following command (and press Enter.
But many a time it is seen that while running the DISM command viz. Dism /Online /Cleanup-Image /RestoreHealth.
After pressing the enter button, people normally encounter an error in which code is 0x800f081f or the source files could not be found.
This error is one of the weirdest errors people encounter and I am here to let you know how you too can fix this issue by yourself.
So without further ado let’s begin.How To Fix DISM The Source Files Could Not Be Found Error?Method 1:- Download Window 10 ISO File
The first method which I would suggest to fix the issue is downloading the Windows 10 ISO File from the Microsoft official site.
It is quite easy and simple.
The only thing which you need to do is click on this link which will eventually open the Microsoft official site and accordingly you can download the download from there only.
I believe after running the DISM command, you wouldn’t be getting the issue anymore.Method 2:- Run Component Clean Up Command
You can also run the component clean up command to fix the DISM the source files could not be found error.
Let me tell you, it’s very easy.
The only thing you need to do is,
1. Go to your search box which is situated in the top right corner of your computer screen and type Command Prompt.
2. After opening the command prompt window, right-click on it and click run as administrator.
3. After opening the command prompt admin window, type dism.exe /online /Cleanup-Image /StartComponentCleanup.
4. After typing the component clean up command, press the enter button.
5. Restart your computer and try running the DISM command.
I hope you wouldn’t be getting the issue anymore.Method 3:- Contact Microsoft
If you are still not able to fix the 0x800f081f error, I think you need to contact the microwave support team.
If you contact the Microsoft team personally, I believe they will eventually find solutions to your problem.
To visit the Microsoft support team page, click on this link to open the page and click on Get Started.
You can contact the team via a virtual assistant and else you can contact via call on this number 18001021100.
Moreover, you can also contact this Microsoft support page where you will find various articles and forums especially focusing on this issue.Conclusion
So here’s comes to the end of this topic.
I believe after reading the entire article, you too can be able to fix the DISMthe source files could not be found error.
I strongly believe, out of the above three methods, one method will definitely help you to fix this issue.
Moreover, still, if you have any queries, I am very much ready to taking up questions.
I suggest you let me know in the comment section below.
SIMILAR POSTS WHICH YOU WILL LIKE,
Last updated on August 6th, 2019
Download amtlib.dll.7z How to install amtlib.dll: Copy file amtlib.dll to the installation directory of the program that is requesting amtlib.dll. If that doesn’t work, you will have to copy amtlib.dll to your. Double-click on the Adobe CC 2017 Patcher located insideit. Set the program in the Program label (be sure to choose x32 or x64correctly). Afterwards, it should begin to detect its copy automatically. The Source Files Could Not Be Found. Try Installing The Roles Role Services
This tutorial contains instructions to resolve the following problem in Server 2016: ’Windows Defender Feature Installation Failed. Source files could not be found’.
After removing the Windows Defender feature and the payload, on a Windows Server 2016, by using the ’Dism /online /Disable-Feature /FeatureName:Windows-Defender /Remove /NoRestart /quiet’ command, it’s impossible to install the Windows Defender feature again. The problem remains even if you define an offline image, as an alternate source path, either in ’Add Roles and Features’ wizard or in the DISM command: ’DISM /Online /Enable-Feature /FeatureName:Windows-Defender /Source:X:SourcesInstall.wim’.How to FIX: Windows Defender Feature Installation Failed – 0x800f081f on Server 2016
1. Place the Windows Server 2016 installation Media on the server. *
* Note: If you don’t own the Windows Server 2016 Installation media, then download the media in an ISO file and then mount the ISO. Keep in mind that you have to mount an image of the exact same version and build of the Windows Server 2016 that you want to repair.e.g. If you ’re running the 1607 version, you need the 1607 version in an ISO file.
2. Create the following two (2) folders on the root of C: drive:
1. mountdir
2. msu
3. Launch Command Prompt as Administrator and give the following command, to list all the Windows Server 2016 versions that included in the ’install.wim’ file.: *
*dism /Get-WimInfo /WimFile:X:sourcesinstall.wim
* Note: Where X = the drive letter of the Windows Server 2016 install media or the mounted ISO file. e.g. if the install media is on drive H: type:
*dism /Get-WimInfo /WimFile:H:sourcesinstall.wim
4. Find out the Index number of the installed Server 2016 edition.*
* e.g.: If you have installed the ’Windows Server 2016 Standard with the Desktop Experience’, then the index number is 2.
5. Then give the command below to extract the corresponding to your Windows Server 2016 version ’install.wim’ file (Index number): *
*dism /export-image /SourceImageFile:X:sourcesinstall.wim /SourceIndex:IndexNumber /DestinationImageFile:C:install.wim /Compress:max /CheckIntegrity
* Note: Replace at the above command the drive letter and the IndexNumber according to your case.
e.g. For this example we want to extract the install.wim file with Index number=2 (Windows Server 2016 Standard) to the root of the ’C:’ drive (C:install.wim). So, the command will be:
*dism /export-image /SourceImageFile:H:sourcesinstall.wim /SourceIndex:2 /DestinationImageFile:C:install.wim /Compress:max /CheckIntegrity
6. When the extraction is completed, proceed and remove the ’Read Only’ attribute from the extracted ’install.wim’ file, by giving this command:
*attrib.exe -r C:install.wim
7. Now, mount the extracted install.wim image to ’C:mountdir’ folder, with this DISM command:
*dism.exe /mount-wim /WimFile:C:install.wim /index:1 /mountDir:c:mountdir
8. give the following command to see the installed Server version.
*winver
9. According to the installed version, navigate to Microsoft Update Catalog and download the corresponding cumulative update for your Server 2016 version/build* and then place the update into the ’C:MSU’ folder.Dism Restorehealth Error 0x800f081f
* e.g. If you have the 1607 version, proceed and download the KB4103720 update.
10. When the download is complete, proceed and update the mounted offline Windows image (at ’C:mountdir’ folder) with the downloaded update (from ’C:MSU’ folder), by giving this command:
*Dism /Add-Package /Image:C:mountdir /PackagePath:C:MSUUpdate-Name.msu /LogPath:AddPackage.log
* Note: In the above command change the ’Update-Name’ with the name of the downloaded update. For example: if you have downloaded the KB4103720 update, the command will be:
*Dism /Add-Package /Image:C:mountdir /PackagePath:C:MSUwindows10.0-kb4103720-x64_c1fb7676d38fffae5c28b9216220c1f033ce26ac.msu /LogPath:AddPackage.logThe Source Files Could Not Be Found
11. When the operation is completed, open Task Manager and close the Explorer.exe task. (this is important otherwise you ’ll receive the error ’the directory could not be completely unmounted’ at the next step).
12. Give the following command to commit the changes back to the offline ’C:install.wim’ image and to unmount it. *Dism The Source Files Could Not Be Found
*Dism /Unmount-WIM /MountDir:C:mountdir /Commit
13. When the changes are committed back, open Task Manager again and from the File menu, choose Run New Task, type explorer.exe and hit OK.
14. Finally, give the following command to install the Windows Defender feature in Server 2016:
*Dism /Online /Enable-Feature /FeatureName:Windows-Defender /all /source:WIM:C:install.wim:1 /LimitAccess.net 3.5 The Source Files Could Not Be Found
15. Close all windows and restart your server to apply changes.
That’s all folks! Did it work for you?
Please leave a comment in the comment section below or even better: like and share this blog post in the social networks to help spread the word about this solution.If this article was useful for you, please consider supporting us by making a donation. Even $1 can a make a huge difference for us in our effort to continue to help others while keeping this site free:If you want to stay constantly protected from malware threats, existing and future ones, we recommend that you install Malwarebytes Anti-Malware PRO by clicking below (we do earn a commision from sales generated from this link, but at no additional cost to you. We have experience with this software and we recommend it because it is helpful and useful):Full household PC Protection - Protect up to 3 PCs with NEW Malwarebytes Anti-Malware Premium!
Download here: http://gg.gg/oep67
https://diarynote-jp.indered.space
コメント